Puddle Duck Canoe
Tom Wakefield built this 14′ Puddle Duck Canoe with plans from Gil Gilpatrick. He built the 45 lb hull from 1/4″ clear pine then coated it with fiberglas cloth and epoxy. The rails are from clear pine and mahogany.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Tom Wakefield built this 14′ Puddle Duck Canoe with plans from Gil Gilpatrick. He built the 45 lb hull from 1/4″ clear pine then coated it with fiberglas cloth and epoxy. The rails are from clear pine and mahogany.
Ted Jones of Gundalow Boat Shop in Ossipee, NH designed and built this 11'6" dory skiff BANNITO for his son and grandson. She was launched in September 2002 on the Sakonnet River in RI. Her hull is okoume plywood with epoxy and Dynel. She is based on his earlier design, the DORITA dory.
Dennis Hefling and his son built this 17'5" cedar-strip canoe from plans that Dennis drew up.
Stu Fyfe of Brewster, Massachusetts, launchged this 54" Beach Pea Baby Cradle just about the time of the launch of his grandson, Owen James Fyfe.
Andy Rockwood launched this John Gardner Surf Dory on June 24, 2001. He built the boat for Stuart Walker of North Muskegon, MI, who plans to use the boat on the Great Lakes. Andy built the boat using traditional methods with white pine planking on white oak frames.
Ralph Fogle designed and built HONEY BEAR, a 9′8″ × 3′8″ rowing skiff. He planked the sides with 1/2″ tongue-and-groove spruce, and the bottom with 5/8″. He used stainless steel square driver screws for fastenings, and finished the hull in clear epoxy.
James McGorry of Aurora, Colorado, built this 17′ LOA kayak relying on information from Nick Schade’s two articles on building the 10′ Nymph kayak that appeared in WB 199 and 200. He made the hull and outer rail from basswood, and the stems, seat, backrest, and inner rail from mahogany.
This is my first boat, a Penobscot 17 designed by Arch Davis. I built the boat with a bright finish cypress/teak deck, cypress faced sheerstrake, and white oak coaming, rub rail and flooring. A slight modification was made to the width and curve of the sheerstrake.
Relying on Nick Schade’s book The Strip-Built Sea Kayak, George Nourse built this Expedition single kayak from a kit by
The Northwest School of Wooden Boat Building launched this 14′7″-long Scandal skiff last summer. William Atkin designed the Scandal in 1924 to be a slender and fast boat suitable for use with a small outboard motor.
See link for photos and much more information on the vintage, including a short video of each sho
Original 55’ pilot cutter in superb condition following extensive award-winning restorations in C
12' Beetle Cat with sail rig. Boat needs new ribs. Planking is good. Asking $500.
36' 6" L.H.F. ketch that's a joy to sail and beautiful from all angles.