Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Gypsy

Designer: 
Woods Designs
Skill Level to Build: 
Moderate

The GYPSY 28 was the Woods Designs’ own cruising boat for five very successful years. It was designed as an easy-to-build budget ocean cruiser and many are now sailing in all corners of the world. Several have made ocean passages.

The...

7' 7" Nutshell Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.xx

The ladder frame—the “foundation” of the boat—is now included with...

Concordia 33'

Designer: 
Concordia Company
Skill Level to Build: 
Advanced

A roomy, comfortable auxiliary cruiser with sufficient headroom, two cabins and an enclosed head.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

...

Mill Creek 16.5 Hybrid

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Intermediate/ Advanced

The Mill Creek 16.5 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck to create a wonderful high volume tandem kayak

Petrel SG (Stitch-and-Glue)

Designer: 
Nick Schade
Skill Level to Build: 
Intermediate

Nick Schade’s line of strip-planked Greenland-style sea kayaks are renowned for sophisticated performance on the water, beautiful lines, and sculptural hull details. But strip-planked boatbuilding is not for everyone. Novice woodworkers and...

ROBERTS 19

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 
AVERAGE SKILLS

Roberts 19 Trailerable gunkholing and coastal cruiser. Plans and full size frame patterns available for wood epoxy construction.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

BRANDO Footy Plans

Designer: 
Flavio Faloci

The “Footy” class, for boats which fit within a 12″ x 6″ box.

We think you’ll find this design completely irresistable.

Designed by Flavio Faloci a naval architect based in Genova, Italy, BRANDO includes 12 pages of plans,...