Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

32' MYSTIC Sharpie Ketch

Designer: 
Edward S. Brewer
Skill Level to Build: 
Intermediate

This 32′ double-ended sharpie ketch will provide the amateur builder with a shoal-draft cruising boat of simple construction.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 4 sheets....

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

Half Model Plan GLORIANA

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Sloop designed by N.G. Herreshoff in 1891. A revolutionary yacht, she featured a convex bow rather than the then-current long, hollow entrance. Overall length of the finished model is 36″.

You’ll receive 4 pages of plans historical...

Sherpa

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking

High capacity yacht tender with sailing ability. Exceptional stability, suited to beginner boatbuilders

Thomas 50 Dutch Barge

Designer: 
Nick Branson
Skill Level to Build: 
intermediate

Aesthetics are important for pride in ownership and above the waterline the Thomas carries all the character and grace of the original big brothers. No mistaking the raking counter, heavy sheer and purposeful air. Below the waterline is a...

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

Pulsar 36

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

A trimaran is a good choice for those who want to get very high performance on a cruising boat.
The flared main hull offers nice cruising accommodation with two large double cabins, a convenient dinette, standing headroom at the galley,...