Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Lone Star Twelve Rowboat

Designer: 
victory studios
Skill Level to Build: 
moderate

Lone Star Twelve rowboat, built using traditional methods, but with marine plywood for a leak free low maintenance hull. No lofting required. Includes measurements for station molds, transom, construction details and full size stem pattern....

Bounty - Row Boat/Tender

Designer: 
Mark Evans
Skill Level to Build: 
Beginner

A practical, strong, easy-to-build rowing dinghy or yacht tender and an ideal first-time boat building project. Build your own boat with our 45 page, photo illustrated instruction manual. Bounty is the ideal choice where a small lightweight,...

13' Sailing Peapod

Designer: 
Doug Hylan
Skill Level to Build: 
Basic to Intermediate

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

...

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...