Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 5 sheets with instructions.

Sail Area - Lug 83 sq. ft.

Sloop 95 sq. ft.

START 60

Designer: 
ACDesign
Skill Level to Build: 
beginner

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.

The hull lines and the deck are to corner for simplicity of...

18' 8" Mackinaw

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

...

Milford 20

Designer: 
Neville Watkinson & Mark Fitzgerald
Skill Level to Build: 
Intermediate

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in...

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

18' Swampscott, JOHN DORY

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

A refinement of the traditional Swampscott working dory for recreational use.

Plans include nine different rigs.

Construction: Glued lapstrake plywood over sawn frames.

Alternative construction: Traditional dory construction...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

Chesapeake 14

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Chesapeake touring kayaks are icons in the sea kayaking world. Built in the thousands in dozens of countries around the world, the Chesapeakes are solid-tracking, comfortable kayaks.