Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

NKS 36

Designer: 
NICOLAS SKAF
Skill Level to Build: 
MIDIUM professional

36′ Center console boat with 10′ beam. Double air ventilated bottom steps. Twin or triple outboards or twin inboards.

Lion 600

Designer: 
Unik Yachts

600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.

The yacht can be easily transported on a trailer behind a car, and it opens up the...

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

Pax 18

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

POLLY

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

POLLY, designed to compete in Diecipiedi (10 Foot) Class (www.diecipiedi.it) is rather large and stable. Quite comfortable for its size it may be used also for sailing excursions.

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Palm Beach Runabout

Designer: 
Nelson Zimmer
Skill Level to Build: 
Advanced

This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.

Construction: Batten-seam planking over sawn frames.

Lofting is required.

Plans include 4 sheets.