Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Tricky Five

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it...

ROBERTS 64

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 64 - Steel or Aluminum or Fiberglass

This design was originally based on the very successful Roberts 53 and is assured of acceptance by those builders who require a larger boat.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

TRAWLER YACHT 520 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Voyager TY 520 Kit or Cutting files Developed from our proven Trawler range - This kit is for the serious cruiser or 'live-aboard'. The displacement hull is capable of cruising at around 8 to 14 kt

Ashes Solo Day

Designer: 
Trevor Paetkau - Ashes Still Water Boats
Skill Level to Build: 
Suitable for amateur builders

The Solo Day is simple. She’s light, easily carried, and not for the fussy. Best results will be obtained if the builder can curtail the urge to use fancy marquetry, or exotic woods. Built as designed she will weigh as little as 30 pounds, will...

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...