Oar / Paddle
Skana
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.
20' LOA carvel-planked open daysailer. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets, and suggested for experienced builders only as the plans info is sparse.
ONDINA is a kayak designed with little compromise and destined to those who wish to experience long excursions at sea, it is pleasant to row, stable and, above all, fast.
Oceangoing carvel-planked cruiser with a choice of centerboard or ballast keel configurations.
Construction: Carvel planked over sawn frames.
Alternative construction: Strip.
Lofting is required.
Plans include 7 sheets.
ROBERTS SPRAY 36 is a well proven offshore cruising sailboat that you can build from plans and full size patterns
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
S/V 14 designed by Simonis Voogd Design has been specifically created for sailors with disabilities. The E-book consists of 100 pages plan + videos, it is offered for free BUT, it must be for the benefit of the disabled community.
An extremely light weight canoe of good carrying capacity, it is very steady and easy to portage through the brush.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
Built on Deer Isle in 1942 , it has an 800 pound steel keel, 4 foot draft.
This vessel received a complete refit in 2007-2008 including re-powering, new decks, new standing
Great little boat I’m letting go of for something larger.
Built by the Burr Bros in 1960, this 36' beauty with a 10'9" beam was restored over seven years a