ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

25' Keel/Centerboard Sloop

Designer: 
John Alden
Skill Level to Build: 
Advanced

A fast and able auxiliary cruiser with wheel steering and accommodations for three.

Construction: Carvel Planked over steamed frames.

Alternative construction: Cold-molded or strip.

Lofting is required.

Plans include 5...

Titicat

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

TITICAT is a 9-meter sailing catamaran designed with a modern style for the transport of tourists and to build in strip planking. It was designed to sail on Lake Titicaca (Bolivia). As you can see from the drawings and photographs the TITICAT is...

NKS 36

Designer: 
NICOLAS SKAF
Skill Level to Build: 
MIDIUM professional

36′ Center console boat with 10′ beam. Double air ventilated bottom steps. Twin or triple outboards or twin inboards.

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

SILVER 45

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

SILVER 45 is a very classical small runabout capable of planing at full charge with a 25 to 40 HP outboard engine.

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.