Sailboats - Cruising
SANPIERA
SANPIERA is a re-elaborated version of the Sanpierota, a traditional boat of the Venetian lagoon which shows many particular and interesting features.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
SANPIERA is a re-elaborated version of the Sanpierota, a traditional boat of the Venetian lagoon which shows many particular and interesting features.
Traditional Wood Strip CanoeThe Mystic River is a tidal estuary in southeast Connecticut. Starting in Old Mystic it runs through the pretty seaport town of Mystic, home to the Mystic Seaport Museum, out to Fishers Island Sound.
Kingfisher’s shape was inspired by famous Chestnut Prospector. Hull width of 93cm, flat bottom and slim shape gives good stability and maneuverability. It is designed for crew of 2 with additional equipment (tents, fishing rods…).
The Workstar 17 concept of plywood/epoxy boat building was the result of a co-operation between Working Boats UK Ltd and Humphreys Yacht Design, which enabled people with no experience in building boats to put together, from a comprehensive kit of profiled parts, epoxy and FRP tape, a Workstar 17
The FireBug is a small sailboat or yacht that you can amateur build at home, sailing club or school, then learn to sail. It's easy to sail and will be the fastest boat on the bay. Low cost too!
The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.
Originally designed for WoodenBoat Magazine’s Design Competition II, Puget Sound Cruiser is an efficient, rugged, comfortable cruiser that can sleep two comfortably, or four in a pinch.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.
Construction Method: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required
Plans include 4 sheets.
British plank-on-edge cutter designed by George L.
See link for photos and much more information on the vintage, including a short video of each sho
Original 55’ pilot cutter in superb condition following extensive award-winning restorations in C
12' Beetle Cat with sail rig. Boat needs new ribs. Planking is good. Asking $500.
36' 6" L.H.F. ketch that's a joy to sail and beautiful from all angles.