Sailboats - Daysailers
BLUEMOTION 550
BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013.
Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.
Construction: Glued lapstrake plywood.
Alternative construction: Traditional plank, cold molded and strip plank.
No Lofting required.
Plans include 10 sheets.
The Tolman Skiff has a Dory heritage with a “V” bottom and was designed to handle the inland and open waters of Alaska and is a very capable ocean skiff.
The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.
Thurlow provides you with three different construction alternatives: wood-strip planking, with frames; woodstrip frameless planking covered with fiberglass; and wood-canvas construction.
Construction: Wood-canvas, wood-strip-plank or wood-strip fiberglass
A roomy, comfortable auxiliary cruiser with sufficient headroom, two cabins and an enclosed head.
Construction: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required
Plans include 5 sheets.
Paper Jet 14 plywood stitch and glue sailing skiff
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.
Bought 1982, extensive rebuilding. New stem, transom, cabin, cockpit, etc.
Built by Richard Cottreau. Heavily constructed. 60-hp Honda, very low hours.
Would make a great lake boat or for your children, low draft.
Beautiful 15' Crab Skiff Sailboat. Built at the St. Augustine Lighthouse. $5,000.