Oar / Paddle
Sail Kit for kayaks
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.
21′ 2″ Inboard/outboard runabout, built of marine plywood.Several design options include center console, outboard as well as inboard/outboard.And, configurations also include different heights for the windshield.Construction: Plywood.Lofting is required.Plans include 5 sheets.
Didi Mount Gay 30 radius chine plywood racer
The Lobster Boat 26 (LB26) is a plan for amateur builders like no other!
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
Design Specs:
Flat Bottom
Open Boat
LOA. 17′-3″ (5.2m)
Beam 6′ (1.8m)
Weight 450 lbs (204 kg)
Material Plywood, Hard Wood
Fiberglass, Other.
Recommended hp. 25
A most elegant lapstrake, plywood peapod for oar and sail.
Full-sized mold patterns are included.
Construction: Glued-lapstrake plywood.
Alternative construction: Traditional lapstrake.
No lofting is required.
Round-bottomed, outside-ballasted cruiser with accommodations for two.Construction: Carvel planked over steamed frames.Alternative construction: Strip.Lofting is required.Plans include 4 sheets.Please note: plans call for an engine long ago discontinued.You'll want to find a suitable alternative.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
Mahogany inboard. New varnish & bottom paint. Newish 383 (500-hp). 50 mph. New upholstery.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).
Partial restoration. Has rare Edson oscillating (worm) steering system.