This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
San Francisco Pelican built by George Weinbrenner. Designed by Captain Bill Short. Sails in the lakes and coastal waters of North Carolina.
Taking just three years to complete this Karl Stambaugh designed centerboard ketch, Mort Hyslop launched the EMILY P on July 15, 2002 in Northern Lake Michigan. He used marine fir plywood for the hull, built over Douglas fir frames and covered with cloth and epoxy.
RIVER PRINCESS was launched in June 2004. Builder and owner Rodney Collard writes "This design was drafted on paper from photographs from WoodenBoat magazine. We read up on stitch-and-glue construction.
Designed by Mike Roberts of Headland Bay Boats in Brisbane, Australia. This is the Eve (short for “Evolution”) 16, a strip plank bottom and glued lapstrake sides, based on the same designers Green Island 15 Stitch and Glue version.Sail area is a gunter rig of about 106 sq. ft.
CLC Kaholo 12-6 built from plans setup both for distance paddling and surfing. The tail-block is a combination of purple heart and ipe.
My 1954 Edwin Monk designed, Popular Mechanics,15 foot Knockabout, in the water again after extensive restoration, her name Cap'n Ellery after Artist, author, fisherman, and my hero Ellery Thompson 1899-1986.
Kwei U, of Mill Valley, California, had built model boats and airplanes for 50 years before deciding to build a full-sized boat.
Rebekah Rogers built her first boat, this Salt Bay Skiff, with her Dad, Dave Racicot.
Gypsy is a 14′ dory built over the winter by Bill Blanas with the help of his minions George Rhodes and Adrian Reinhardt. It is built primarily of Sitka spruce, and was launched this September at Jewel Lake in Anchorage, Alaska, in a carnival-like atmosphere.
Our own Nutshell Pram, built during 2013, and launched on November 25, 2013 in the waters of the Rio de la Plata, Port of San Isidro, Argentina.
Located in Mystic, Connecticut - 3 staterooms and salon with A/C units, sleeps 8 - well maintaine
Wood hull built with meticulous and painstaking detail from a kit using a "stich-and-glue" method
