SHADOW
SHADOW of Gig Harbor, Wa USA. Maiden voyage April 14th, 2024. For his 3rd wooden boat build Stewart Nelson chose the SQUIRT, a Glen L. Design. The 10′ craft is outfitted with a 15hp outboard motor.
SHADOW of Gig Harbor, Wa USA. Maiden voyage April 14th, 2024. For his 3rd wooden boat build Stewart Nelson chose the SQUIRT, a Glen L. Design. The 10′ craft is outfitted with a 15hp outboard motor.
When Covid hit I realized I would have time to build a boat. So, I did, a Glen-L zip caught my eye and I got started. I wanted the look of the boat, but I also wanted to go fast so I over built and put on a bigger than suggested motor.
In the summer of 2008, David M Jones of Suwanee Georgia was given a 1957 Speedicraft designed by Otis Borum of Jacksonville Florida. The Honey Bee’s deck, transom and 25 percent of her hull were rotten. Dave approached his Father, Morris A.
Honey was launched a few days before Christmas 2023. She is a stout 13 foot skiff designed and built for the Westport River. She's built of local materials. All of her hardware and fasteners are from C.E. Beckman's of New Bedford and all of her paint is from Kirby's.
The Workstar 17 concept of plywood/epoxy boat building was the result of a co-operation between Working Boats UK Ltd and Humphreys Yacht Design, which enabled people with no experience in building boats to put together, from a comprehensive kit of profiled parts, epoxy and FRP tape, a Workstar 17
The Sponge Docks Skiffs are designed for first-time builders, due to their simple stitch and glue assembly, yet on the water these good looking boats are versatile, stable and dry.
The Sponge Docks Skiffs are designed for first-time builders, due to their simple stitch and glue assembly, yet on the water these good looking boats are versatile, stable and dry.The SDS19 is the latest in the series, and includes:
This plywood/epoxy construction 24 ft motor boat was designed specially for amateurs boat builders.Plans are available in metric and includes construction drawings and full size patterns CAD files.All CNC files are optimized to use standard plywood sheets of 2400 x 1200 mm and every panel have a
Design Specs:
Flat Bottom
Open Boat
LOA. 17′-3″ (5.2m)
Beam 6′ (1.8m)
Weight 450 lbs (204 kg)
Material Plywood, Hard Wood
Fiberglass, Other.
Recommended hp. 25