This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers.
If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here.
(All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
At The Folk School of Fairbanks, Alaska, last August, a group of students and their instructors, Andy Reynolds and Bruce Campbell, built a 12′6″ Stand-up Paddleboard in a little over two weeks.
Having built many mono hull boats thought it time to try a catamaran as they say 2 is better than one.
“That’s not a boat, it’s a museum piece. It’s too beautiful to put in the water.”
Completed Chester Yawl, from plans at Chesapeake Light Craft. This is a working boat, intended for rowing by one or two on lake Erie. It has a work boat finish. The gravel beaches on this part of Lake Erie are very hard on the finish.
This is my first boat, a Penobscot 17 designed by Arch Davis. I built the boat with a bright finish cypress/teak deck, cypress faced sheerstrake, and white oak coaming, rub rail and flooring. A slight modification was made to the width and curve of the sheerstrake.
This is my CLC Shearwater Sport Hybrid. Believe it or not this is the first thing that I have ever built from wood. It took me a little over 2 years to build. Built in an unheated building and working with epoxy in Buffalo gives you less that 6 months to work per year.
Asher Molyneaux built this kayak as a homeschooling project in winter/spring 2014. The frame is made of spruce, cedar and ash. The skin is ballistic nylon coated with two part urethane coating. The paddle is poplar.
Jessica Glazer took these pictures of her father, Russ, sailing WILLIWAW. Arch Davis designed the gunter-rigged Penobscot 14 , that Russ built with 1/4″ mahogany plywood, pine stringers and seats, and fir knees and spars. Russ sails his boat in Western Massachusetts.
Owner Nigel Vaughan had an old Eventide that was becoming unreparable, and couldn’t find another boat that suited his needs. He wanted to introduce a separate heads that could be accomodated by adding a foot to overall length an taking off a foot of the cabin seats.
I recently launched my build of a Candu Junior mini tugboat designed by Berkeley Eastman.
The Candu Junior is 11 feet loa. This build is powered by a Honda 20 hp outboard and gets on a plane at about 18 mph. The motor is mounted in a motor well/ tunnel inboard.
Located in Mystic, Connecticut - 3 staterooms and salon with A/C units, sleeps 8 - well maintaine
Wood hull built with meticulous and painstaking detail from a kit using a "stich-and-glue" method
