Plans & Kits

Didi 40cr radius chine plywood cruiser/racer

Traditional "Whitehall" elegance in a stitch-and-glue kit. For casual single and tandem rowing, we do not believe there is a better build-your-own-boat kit than the Chester Yawl.

“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

In designing Capriccio we have been inspired by the aesthetics of the classic sport runabouts of the Thirties, which had the pilot seat in the extreme aft-wards of the boat and a powerful engine under a long deck in front of them.

The Headwater TRANSPORT 9.9 is an easily Car-Topped Pram Dinghy with a constant deadrise 10 deg. V-bottom Planing Hull  with lifting chine strips.  Bow and stern seats provide level flotation if the hull is swamped, and also provide dry storage if watertight closures are installed. 

The Multi 5 is a multihull with a simple construction and good performance. The construction is extremely simplified by the drift absence. The good hulls volume allows to spend pleasant days and moving along the coasts with other friends, having the opportunity to carry up to four people.

Shoal-draft voyager

The Sparrow Hawk is proportionally downsized for the smaller paddler.

YOUNG BAGGIE, with a hull length of 4 m, is the medium size of the three boats we designed drawing inspiration from the traditional sandbaggers.