Plans & Kits

Deck saloon voyager

Rugged carvel construction, round bottomed. Driven by a small inboard. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded, Strip. Lofting is required. Plans include 3 sheets.

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).

Chesapeake Light Craft’s Eastport Nesting Pram shares its hull with the popular stock Eastport Pram dinghy, a champion 7′9″ yacht tender that can carry a decent load, rows and tows with ease, and sails beautifully.

Meghan has a constant deadrise V-bottom hull with  a capacity of 1-2 passengers and features for & aft flotation chambers. Her rig consists of a 16ft free standing mast, 9′5″ wishbone boom and 65 square ft sail.

Paper Jet 14 plywood stitch and glue sailing skiff

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.

ATLANTIC 550