LIL WOODY
Kevin Brown needed a shallow-draft, v-bottomed boat for fishing the marshy coast of Georgia, so he designed and build LIL WOODY. At 15 feet long, LIL WOODY is powered by a 55-hp outboard, and can run up to 28mph.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
Kevin Brown needed a shallow-draft, v-bottomed boat for fishing the marshy coast of Georgia, so he designed and build LIL WOODY. At 15 feet long, LIL WOODY is powered by a 55-hp outboard, and can run up to 28mph.
The MARY OLIVER, built for photographer Amy Melious, is named for the poet, and for all poems inspired by nature. The designer and builder, Martin Herbert, looked hard at the work of J. Henry Rushton as well as commentaries on the type by Iain Oughtred.
Woodrow Smith (standing) and Robert McDonnell (kneeling) built this Redbird design canoe, 17'9" long. They built her from scratch, starting with rough-cut lumber. They are proud of their work, as the canoe turned out to be a work of art.
With bowsprit and boomkin this Steve Redmond Elver design has a total length of 27'. Built by Gib Sosman over 14 years of part-time work, EPONA was launched on May 29, 2003 on Clinton Lake in Kansas.
The stringers, floorboards and wales are Douglas Fir. Stems and “decks” are 12 mm Meranti ply and ribs are Arroyo Willow cut a short distance from the shop. Skin is 8 oz. polyester from George Dyson and it's finished with four coats (1st thinned 7x1) of clear water-based varnish.
With assistance of friends we built 6 rowing shells using Mr. Ron Mueller of Wayland Marine of Bellingham, WA design.The Merry Shelly is an 18ft x 24" 35lb hull stitch and glue kit. The rowing device is a RowWing which was fastened to 4 interior supports.
David Blake built MOLLY, a 16′ x 6′ Stevenson Weekender sloop from okoume plywood and mahogany, then covered the hull with fiberglass and epoxy. He made the mast from Sitka spruce and the boom and gaff from Douglas-fir.
Bruce Bowlen built this George Chaisson designed dory tender from information given in John Gardner's "The Dory Book." The bottom and planking are made from plywood, stem and skeg from oak, and transom and remaining parts from mahogany.
Members of Marietta Boatbuilding Workshop built this Newfoundland Trap Skiff. They plan to sell her as a fundraising project for the Marietta Rowing and Cycling Club of Marietta Ohio. She was built during the summers of 2001 and 2002 with white cedar planking over white oak frames.
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.