Lorien
A 1952 8-metre built by Anker & Jensen (number 480) in Vollen near Oslo, Norway was relaunched after a lengthy restoration by Tiffany Yachts on the Great Wicomico River, Chesapeake Bay, Virginia on June 29th.
This section of our web site, an extension of the Launchings department of WoodenBoat magazine, is dedicated to sharing news of recently launched wooden boats built or restored by our readers. If you’ve launched a boat within the past year, please email us at launchings@woodenboat.com, or post your news here. (All posts are subject to approval and editing before being made live.)
To refine your search, add quote marks. If you search Wood Duck, you will get all the listings which include Wood and Duck. To refine, search “Wood Duck” and you’ll see just Wood Duck results.
A 1952 8-metre built by Anker & Jensen (number 480) in Vollen near Oslo, Norway was relaunched after a lengthy restoration by Tiffany Yachts on the Great Wicomico River, Chesapeake Bay, Virginia on June 29th.
I built this cedar strip version of a CLC Annapolis Wherry over an 18 month period & about 1500 hours. Rather than buying the recommended “drop-in” rowing rigs I constructed my own assemblies in both the single & double configurations. The boat is a sweet & composed row!
Dick Harrington built this Iain Oughtred-designed Acorn skiff for Dave Clarke. Her overall length is 8' and she can be rowed or sailed. The skiff was built of okoume plywood.
Seven-year-old Jamie Lowrey had the idea of building this boat from a single sheet of spare plywood. He and his father made scale models from shirt cardboard and built a full-size model from cardboard boxes in the living room of their Manhattan apartment.
Ken Foote built TRUANT using Edwin Monk's book How to Build Wooden Boats. TRUANT is a 12'6" catboat with 5'beam. He launched her in September of 2002. He used poplar for the bottom and sides, cypress and cottonwood for the trim.
Craig Kitchen of Marquette, MI has built several boats in the past few years - Chesapeake 17, an Endeavor, a Guillemot, a Winisk 17, and a CLC 16LT shown here. Craig built this 16LT with cedar-strip deck for Cheryl Sleeman of Michigan.
Doug Robertson named this canoe BOING for the noise it will make if all the strips come apart. It is a modified Bear Mountain Rob Roy Canoe. The 13' design was shortened to 11' 6". It weighs 26 pounds. Doug used cedar bead and cove strips covered on the outside with 5 oz fiberglass.
SHELBY is a 11'2" Shellback Dinghy built by Chris Ireland of Toronto, Canada. He built SHELBY over the winter of 2000-2001 and launched her into the Bay of Quinte at the eastern end of Lake Ontario in May 2001.
Gary Knox writes "A flea market 'find' with five plus coats of 'Camp Green' paint; Gary and friends stripped and sanded down this pre-WWII cedar on oak classic. It revealed a solid mahogany transom, which was hand-planed down for a clear finish.
After building this boat at age 16, Brandon Camp writes "It is Ken Hankinson's design, Buckboard, purchased from Glen-L Marine Design. It has a length on deck of 11'11" and a beam of 36", and weighs 85 pounds. The rig is a 66 square foot lateen sail, which can keep up with my Mom's Lido!
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.