to WoodenBoat.com or

22'4" Dragonfly


Category: Rowing Craft
22'4" Dragonfly
22'4" Dragonfly

The deck around the sliding seat is a bit challenging to build. Because the boat is large and not for the amateur builder it has not had a big following and therefore we sell it only on special arrangement and unfortunately without a manual. The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it. See the dragon fly at www.canadiancanoes.com - click on their custom work tab and you will see photos of the boat and the outrigger - which is the part that will be difficult to build. Ron at Canadian Canoes built two before he realized how much work it would be to make a decent how-to manual to go with the plans and with a limited market for this project he did not proceed. Having said that - if you are familiar with building canoe or a kayak you will not likely have any trouble if you want to try your hand at a new challenge.



DESIGN SPECS
Designer:
Year of Design:
LOA:
22'4"
Beam Length:
Draft Length:
Displacement:
260 lbs
Materials:
Wood
Fiberglass
Propulsion:
Skill Level to Build:
some experience required
Cost:
150
Website:
Contact Information:

P.O. Box 191

Peterborough ONTARIO K9J 6Y3
Phone: 705-740-0470

<< VIEW ALL BOAT PLANS & KITS