to WoodenBoat.com or

Sea Bright 36


Category: Sailboats Cruising
Sea Bright 36 Sail Plan
Sea Bright 36 Plan Port
Sea Bright 36 Plan Stbd
Sea Bright 36 Construction
Sea Bright 36 Deck Plan

SEA BRIGHT 36

L.B.P.: 36′

BEAM: 10′ 11″

DRAFT: 1′ 8″/4′ 7″

DISPLACEMENT: 9,500 lbs

BALLAST: 3,483 lbs, 2,000 lbs lead foil laminated in keel; 250 lbs trim; 633 lbs water; 600 lbs fuel

WATER: 75 gallons

FUEL: 80 gallons

RIG: Gaff-rigged Cat Schooner

TYPE: New Jersey Sea Bright Skiff. Suitable for sailing in coastal and offshore conditions. This model is designed with watertight floatation compartments and accommodations for four with a galley and head. The type has an excellent record as a lifesaving vessel, and can be used as an island-hopper, coastal cruiser, and ocean voyager. This vessel is an excellent candidate for long passages single-handed.

CONSTRUCTION: Marine plywood covered with epoxy-saturated Xynole-polyester fabric. The hull is frameless, being built over bulkheads. Options for planking include chine log and stitch-and-glue (Plans are drawn for stitch-and-glue). Skill-level required for construction is moderate.

OPTIONS: An inboard diesel (2 cyl Yanmar 2YM15) may be installed under the forward end of the cockpit well as shown. An outboard in a well is also possible for this model. Permanent ballast consists of lead foil laminated inside the keel bottom on both sides of the CB trunk covered with ¼″ teak & holly plywood. Standing headroom is 5′ 10″. Additional rigs are available on a custom-design basis.



DESIGN SPECS
Designer:
Reuel B. Parker
Year of Design:
2013
LOA:
36'
Beam Length:
10' 11"
Draft Length:
1' 8"/4' 7"
LWL:
31' 9.5"
Displacement:
9,500 lbs approx
Materials:
Wood
Propulsion:
Sail/Inboard-Outboard optional auxiliary
Skill Level to Build:
Moderate
Available as:
Complete Plans
Cost:
$850
Website:
Contact Information:

email: info@parker-marine.com
snailmail: Parker Marine Enterprises, PO Box 651429, Vero Beach, FL 32965

<< VIEW ALL BOAT PLANS & KITS