Sailboats - Daysailers
Skerrieskiff 17'
Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.
During rise of the nautical tourism on east Adriatic coast in late 1980s, there was a lack in offer of smaller sailboats for day rent and sailing lessons.
"PocketShip" is a small cruising sailboat of refined model, meant to sail well on all points, provide dry camping accommodations for one or two adults, and tow behind a four-cylinder car.
The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.
Tern is a lengthened (to 23'9') version of my earlier 20' design Ratty.
20' LOA carvel-planked open daysailer. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets, and suggested for experienced builders only as the plans info is sparse.
A most elegant lapstrake, plywood peapod for oar and sail.
Full-sized mold patterns are included.
Construction: Glued-lapstrake plywood.
Alternative construction: Traditional lapstrake.
No lofting is required.
Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.Plans contain 16 sheets of drawings, full-sized mold patterns so no lofting is required (no offsets are included with the plans)
HADRON is a new dinghy design for 2011.
The Great Alaskan is a very versatile inshore/offshore powerboat with a seaworthy semi-dory style hull. These fiberglass/wood stitch-n-tape boat plans give the builder the freedom to adapt the cuddy, pilothouse, and cockpit layout to his preference.
Custom hand-made cedar strip/epoxy freight canoe, 18' with square stern.
Launched 2022, WoodenBoat Show winner, sail or row, Atlantic white cedar hull, kick up rudder, sp