ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

Daysailer 30'

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
expert

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

Switzer Bullet 136

Designer: 
Switzer-Craft - Classic Wooden Boat Plans
Skill Level to Build: 
Beginer

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

A low riding speedster able in calm or rough water. This is our only reverse engineered plan due to a factory fire...

Flash 26

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

Trailerable cruiser-racer. Flash 26 is designed to provide the best performance in a trailer able package.

MOTH

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

MOTH, designed according to the rules of the Classic Moth Class, is a fast and enjoyable boat. It has a narrow hull, designed so as to minimize wet surface, is relatively stable and planes easily.

Williams 24' Gaff Yawl

Designer: 
Fenwick C. Williams
Skill Level to Build: 
Advanced

A simple, spacious, singlehanded cruiser designed for carvel construction. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 7 sheets

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

THALAS 16'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The length of the American Whitehall of the 19th century was between 13′ and 23′. 16′ was the most typical length and the boats were built for 2 or 3 rowers. The classical boat has been re-elaborated to make the design of the boat coherent with...