Sailboats - Cruising
CAPRICE
Caprice is a Mini Offshore Cruiser for two.
Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Caprice is a Mini Offshore Cruiser for two.
Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.
Here is a fine little working type punt that feels at home in the marshlands, as well as the open bay waters.She is 14′-9″ long and was designed around a working load, with a draft of about 3″.
Prospector “Ranger” 15 — a pocket-sized prospector.The Prospector models built by the Chestnut Canoe Company were made in lengths from 12 to 18 ft.
This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been some adjustments to take care of this.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
Centerboard sloop with inside ballast and two settee berths for coastal cruising.
Construction: Carvel planked over sawn frames.
Alternative construction: Strip.
Lofting is required.
Plans include 5 sheets.
Sharpie 31.5′ EGRETL.O.A.: 31′ 6 ½″SPARRED LENGTH: 35′ 6″L.W.L.: 26′ 3″BEAM: 8′ 6″DRAFT: 1′ 2 ¼″ /4′ 8″SAIL AREA : (Depends on rig)DISP.: 5,000# (approximate, for cruising)BALLAST: 1,500 lbs. lead, inside; additional to trim as needed.
Construction - Glued lapstrake plywood.
Alternative construction - Traditional, cold-molded and strip plank.
No Lofting required.
Plans include 8 sheets.
Sail Area - Lug 87 sq. ft.
Sloop 104 sq. ft.
Yawl 121 sq. ft.
The Solo Packette is designed for those searching for pack canoe that they can carry to even through the most difficult approaches.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).
Custom hand-made cedar strip/epoxy freight canoe, 18' with square stern.
Launched 2022, WoodenBoat Show winner, sail or row, Atlantic white cedar hull, kick up rudder, sp