Oar / Paddle
Skana
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Open daysailer featuring plywood construction.
Construction: Lapstrake plywood over sawn frames
No lofting is required
Rig: Sliding Gunter
Plans include 35 sheets
The Unicat 2.4 is all about practicality and safety. Packing a 230kg load capacity, the Unicat is suitable for 3 adults, and the inverted vee hull is much more stable than conventional dinghies. The high freeboard also ensures a dry ride in most conditions.
A simple, spacious, singlehanded cruiser designed for carvel construction. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 7 sheets
The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing.
Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.
Lofting is required.
Sail area is 120 sq. ft.
Plan includes 9 sheets.
Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two
LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.