24 ft Launch - Fisherman
A versatile half-canopy launch, offering many internal layout options. She is especially suited for employment as a personnel launch or commercial fisherman/crabber; or maybe just a family launch.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A versatile half-canopy launch, offering many internal layout options. She is especially suited for employment as a personnel launch or commercial fisherman/crabber; or maybe just a family launch.
A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.
The Workstar 17, as Explorer, Fisherman and Rescue models.Designed using the Prefix System™ by Rob Humphries and Working Boats UK Ltd (the predecessor of Pacific Workboats cc), the Workstar 17 is built from a kit of profiled 1/2″ (12mm) and 3/4″ (18mm) marine plywood.
The idea behind this design was to see how much boat can be squeezed out of a single sheet of plywood 4x8′ (1220 x 2440mm). The resulting boat is suitable for kids to paddle on ponds or very small lakes.
The i550 is a fast modern sharpie type hull shape owing its roots to the historic sharpies of Long Island Sound. The sharpies were known for their speed and seaworthiness, the i550 picks up where they left off.
Carvel-planked, outside ballasted cruiser with choice of three or four berths.
Construction: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq. ft.
Lofting is required.
Open daysailer featuring plywood construction.
Construction: Lapstrake plywood over sawn frames
No lofting is required
Rig: Sliding Gunter
Plans include 35 sheets
This is my latest design for the Twopointfour metre class. An easy to build lowbudget boat ment to be competetive on the race course.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The Sapphire 27 is developed from our very successful Design No. 056, to give a more traditional cruising oriented layout both down below and on deck.
This 16' x 21" [4.9m x 53cm] strip planked kayak is adapted to comfort and responsiveness in acti
This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water.
Relaunched: Phil Bolger designed Gloucester Light Dory built in 1987 by David Bush guided b
“LONE STAR” is a world cruising yacht designed by Naval Architect Jay E. Paris Jr.