Oar / Paddle
The Open Boat
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
Michael P. Smith, Commander, United States Navy (retired) designed and built boats all of his life, from boats on the Clinton River in Michigan to prams and skiffs on Narragansett Bay, Rhode Island.
The Mark V 28 is a trailerable 28 foot outboard powered houseboat
A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials.
Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
20' LOA carvel-planked open daysailer. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets, and suggested for experienced builders only as the plans info is sparse.
Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de
Nautilus is one of the best surviving examples of Ben Seaborn's design and the Blanchard Yard's c
Custom built Bar Tender with barrel back, carbon fibre bottom, mahogany through out, custom inter