Point Comfort 18
Here is another little skiff inspired by a Chesapeake Bay working craft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Here is another little skiff inspired by a Chesapeake Bay working craft.
Simon found an older version of this boat back in the eighties and realized that its thousand-year-old design could be copied and preserved without too much difficulty. He measured it out in ’89 and Bill Nielsen lofted it and drew up the plans in ’91.
A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.Please note: the Westerbeke 26G engine spec’d in the plans is no longer manufactured
The Sapphire 27 is developed from our very successful Design No. 056, to give a more traditional cruising oriented layout both down below and on deck.
A deep-V bottomed, open runabout built of plywood over sawn frames.
Construction: Plywood planking over sawn frames
Lofting is required.
Plans include 5 sheets.
This schooner is designed to be able to cruise offshore with a crew of four people.
Here heavy displacement and built down hull will make for a comfortable motion
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p
Didi Mount Gay 30 radius chine plywood racer
Our version of the Optimist Pram, the "Club Racer"
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.