Sailboats - Cruising
Y-DS 650
day- weekendsailer for coastal cruising in radial chine plywood construction
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
day- weekendsailer for coastal cruising in radial chine plywood construction
This small dinghy can be used for fishing, pleasure rowing or as a tender for a bigger yacht. It can also be fitted with a small outboard motor. The boat has a relatively high freeboard and can take a fair amount of load. It handles very well small waves or wake caused by powerboats.
A stately 10′ rowing/sailing tender originally designed for my own first time build which is currently underway. I wanted an easy to construct boat, yet still retain the techniques and appearance of traditional lapstrake planking.
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
LOA: 33′ 1″LBP: 32′10″LWL: 26′ 8″BEAM: 10′ 0″DRAFT: 2′ 3½″/5′ 3½″DISPLACEMENT: 9,000lbs (approx)BALLAST: 2,000lbs lead under the settees.1,000lbs additional lead for trim.SAIL AREA: 388 sq.
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.
As much functional sculpture as sea kayak, the Arctic Hawk™ could be the most refined stitch-and-glue watercraft anywhere in the world.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).