Oar / Paddle
Sparrow Hawk
The Sparrow Hawk is proportionally downsized for the smaller paddler.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Sparrow Hawk is proportionally downsized for the smaller paddler.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
The Freedom series has gained back the turning ability found in traditional canoe shapes, without sacrificing the speed of the modern hull
ROBERTS 470 - WOOD EPOXY
The accommodation of this design has been laid out to suit two couples. The Roberts 470 makes a fine long distance cruising yacht.
The Tolman Skiff has a Dory heritage with a “V” bottom and was designed to handle the inland and open waters of Alaska and is a very capable ocean skiff.
V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de
In designing Capriccio we have been inspired by the aesthetics of the classic sport runabouts of the Thirties, which had the pilot seat in the extreme aft-wards of the boat and a powerful engine under a long deck in front of them.
21′ 2″ Inboard/outboard runabout, built of marine plywood.Several design options include center console, outboard as well as inboard/outboard.And, configurations also include different heights for the windshield.Construction: Plywood.Lofting is required.Plans include 5 sheets.
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.