Oar / Paddle
9' 6" Nutshell Pram
Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.
An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.
Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes.
Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.
Being a big fan of the Irish Pucan and I’m hoping to make building in wood both simpler and more straightforward. An encouragement for builders to have a go at building their own boat.
The CS23 is an offshore boat based on the Carolina Sport Fishing boats lines.
18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur builder. Bronze hardware for 22 fitttings available fr
Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.This design differs from those of the period in that it is to be constructed in the 'Instant Boat' method using glass fiber and polyester or epoxy resins to make
The AC 75 Evolution design input was to crate a trailerable boat with a small displacement, building with traditional materials such as wood. Another request was to have a comfort and an interior volume typical of larger size boats. We have modified the deck lines to achieve these results.
The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.