Trover
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.
The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
Construction - Glued lapstrake plywood.
Alternative construction - Traditional, cold-molded and strip plank.
No Lofting required.
Plans include 8 sheets.
Sail Area - Lug 87 sq. ft.
Sloop 104 sq. ft.
Yawl 121 sq. ft.
Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two
A V-bottomed plywood skiff designed for rough water - a good fishing boat. Construction: Plywood planking over sawn frames. No lofting required. Plans include 5 sheets.
Harbor Woodworks offers custom kits and boats, tailored to your specifications and desired level of completion. We ship to the U.S. and Canada.Mollyhawk is the longer, and I think - more useful and competent - version of an earlier boat...
The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in.
SPRITZ, an essential and simple boat, has been studied and designed to be the ideal boat for novices in boatbuilding or in sailing.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).