Oar / Paddle
Wood Duck 12 Hybrid
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Wood Duck 10 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
Roberts 25 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.
The latest in Bill Garden’s idea of the perfect kid’s cruising boat. Simple enough to be put together in the garage, salty enough to daydream on, and safe enough as well. She’s quite a handsome double-ender, with a fixed keel. This is an “oh my” boat.Construction: Plywood planking over sawn frame
The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.
Spring Lake Small Craft can provide a very complete CNC routed kit for the Pippie 8 tender. Designed by Mike Waller (http://www.wallerdesign.com.au) to be used as a very versatile tender.
This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required. Plans include 5 sheets.
Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.
The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage is available up forward below the casting deck.
ONDINA is a kayak designed with little compromise and destined to those who wish to experience long excursions at sea, it is pleasant to row, stable and, above all, fast.
The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.