Coastworker 36 Workboat
NEW - COASTER Trawler Yachts & Work boats Here are the first of a new range of Coastal Trawlers that can customized to suit your desires and particular requirements. All will be excellent sea boat
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
NEW - COASTER Trawler Yachts & Work boats Here are the first of a new range of Coastal Trawlers that can customized to suit your desires and particular requirements. All will be excellent sea boat
ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.
VOYAGER 543 CRUISING SAILBOAT WOOD EPOXY PLANS and FSP. This is one big robust world cruiser! Based on the well proven Roberts 532 (many sailing world-wide) was used as the basis of this new design.
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
SF Pelican 12 foot: Three sheets of drawings, step-by-step building instructions, sail plans, lists for materials and hardware, and sailing handling information.
Note: Drawing plans come in pdf format and can be printed to full hard copy format.
Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.You’ll receive 2 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.The pl
Light, lapstrake-planked open canoe for sailing or double-paddling. Construction: Lapstrake planking over steamed frames. Lofting is required. Plans include 4 sheets.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
The success of the proven Chesapeake™ hull shape led quickly to demands for similar three-person designs. With a 700lbs payload and surprising speed.
This design was inspired by Ross Lillistone’s “Water Rat”. The bow transom was replaced by a pointed stem. Also the internal volume and from there the displacement of the boat were increased by about 20%. Changes were made to the seating arrangement as well.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).