Sailboats - Daysailers
Skerrieskiff 17'
Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.
Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.Construction: Strip-planked over laminated frames.Alternative construction: Cold-molded, plans included.Lofting is required.Plans include 6 sheets.
Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.
An ultralight solo pack canoe weighing in at 26 lbs. Carry the boat in one hand, your paddle in the other.
Growler is our new, highly versatile transom-stern cruising canoe, and “big sister” to our popular and highly acclaimed 12 ft. solo canoe, Newt.
A flush decked single engine ocean cruiser for round bottom sheathed strip or multi-chine aluminum construction.
Designed as a cat schooner; both sails have big round poles at their leading edges. Considering the performance potential of this hull, this rig is appropriate. The stayless rig is clean and will be cheap to build with solid fir poles.
‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).
Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made, in particular:
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).