Carolina Sportfish 25
The CS25 is an offshore boat based on the Carolina Sport Fishing boats lines.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The CS25 is an offshore boat based on the Carolina Sport Fishing boats lines.
TRILLO is a fast but non-extreme trimaran that we designed with the aim of making it as simple as possible for amateur boatbuilders.
Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.Construction: Stitch-and-glue plywood.No lofting is required.Plans include 5 shee
Roberts 25 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.
Austral’s design is an outgrowth of my 26' Wynfall design, intended to provide additional space below decks, including standing headroom. She is slightly heavier, longer and wider, and has more freeboard than her smaller sister.
This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.
Construction: Strip-planked over bulkhead / frames
Lofting is required.
Plans include 8 sheets.
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
British plank-on-edge cutter designed by George L.
The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.
Offered here is a beautiful 1958 Ohlson 35' sailboat that's ready for a new home.
All hardware original, complete set Harken blocks. Mast, boom cuddy bars and tent.
$11,900 - Beautiful, reliable boat Complete restoration.