ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

ROBERTS SPRAY 55

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 

Spray 55 - STEEL PLANS & FRAME PATTERNS Many examples of this design can be found cruising in various parts of the world. Specially designed for Multi Chine Steel Construction.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

14' 10" Outboard SPRITE

Designer: 
Atkin & Co.
Skill Level to Build: 
Basic to Intermediate

An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides

Alternative construction: Plywood or glued-lapstrake...

Elfyn

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood. No Lofting required. Plans include 7 sheets with photocopies of Classic Boat building series. Sail Area - 67 sq. ft.

Top Hat

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.

KIS 4.0

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
medium

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders. Since they often find themselves in trouble in building masts, sails and rig of their boats and are likely to spend in these items much more than what they...

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Oxford Shell

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Oxford Shell™ is a swift, smooth running "recreational" shell suitable for all skill levels. Whether you're just learning how to row a sliding seat shell, or you're a seasoned expert.