If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
BABY BAGGIE is quite long and difficult to build for its size (10 Foot) but has been designed mainly to satisfy the desire of having a small elegant boat.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
Here is a small dinghy which can be used for fishing, pleasure rowing or as a tender of a bigger boat. TWEAK was born by tweaking the popular D4/D5 dinghy.
A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.
A narrow beam and shallow arch hull make the Canadien ideal for general-purpose paddling and light tripping.
An 18' daysailer/beach cruiser available in multiple configurations: gaff sloop or balanced-lug yawl rig; traditional plank-on-frame, glued lapstrake, or cold-molded construction; keel or centerboard
NEMAH features a stable, flat bottomed, sharpie type hull that can handle up to 3 passengers and a small outboard up to 5hp. Sides are ¼” plywood and the bottom is 3/8” plywood. A trussed gunnel rail insures hull stiffness.
This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.The construction method is the “stitch and paste” because of its small size.The hull is in CPM 10 mm thk.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
14' 4" Ben Garvey Skiff designed by Doug Hylan and built by master boatbuilder Matt Elwell at Hyl
Custom 1998 Laminated Honduras Mahogany Gentlemen's Racer. 30'.
