Oar / Paddle
Dulcibella
A 10 ft. traditional lapstrake-planked Norwegian style pram. Strikingly elegant but very practical rowing tender.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A 10 ft. traditional lapstrake-planked Norwegian style pram. Strikingly elegant but very practical rowing tender.
The Boat BW is a trailerable plywood stitch-and-glue skiff. The outboard-powered modified-vee hull with lifting strakes provides an efficient hull that rises on to plane with little-to-no porpoising. The below-deck bulkheaded and sealed compartments provide superb secondary flotation.
Light plywood lapstrake sports rowing boat, can carry a small outboard motor, quick and easy build. Built in bouyancy tanks.
The Chesapeake touring kayaks are icons in the sea kayaking world. Built in the thousands in dozens of countries around the world, the Chesapeakes are solid-tracking, comfortable kayaks.
The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would be the fastest possible.
These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.
Simon found an older version of this boat back in the eighties and realized that its thousand-year-old design could be copied and preserved without too much difficulty. He measured it out in ’89 and Bill Nielsen lofted it and drew up the plans in ’91.
Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.
Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.
The idea was a boat that handles like a good racing dinghy, but is much easier to store and transport. Rooftop.
“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.