ADVERTISEMENT

Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Tammie Norrie

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction — Glued lapstrake clinker plywood.

Alternative construction —Traditional plank, cold molded and strip plank.

No Lofting required. Plans include 7 sheets with instructions.

Note: Sheet 3 was corrected in 2013...

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 5 sheets with instructions.

Sail Area - Lug 83 sq. ft.

Sloop 95 sq. ft.

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

Lone Star Twelve Rowboat

Designer: 
victory studios
Skill Level to Build: 
moderate

Lone Star Twelve rowboat, built using traditional methods, but with marine plywood for a leak free low maintenance hull. No lofting required. Includes measurements for station molds, transom, construction details and full size stem pattern....

ALBATROS 26’

Designer: 
Paolo Lodigiani
Skill Level to Build: 
advanced

ALBATROS 26’ is the smallest sister of the ALBATROS family, our modern classic yachts. Far its size it cannot be defined a “blue water yacht” but it is a seaworthy boat.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...