Sailboats - Daysailers
Elf
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Construction - Glued lapstrake clinker plywood.No Lofting required.Plans include 8 sheets with photocopies of Classic Boat building series.Sail Area - 53 sq. ft.
Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or recreation.
A smart sturdy fast paced cruiser; huge interiors for a 8.80 LOA boat, good performance under sail, a very good handling and seaworthy boat even in rough conditions; round hull construction in plywood & epoxy , plans are higly detailed and cover all aspect of building, available both in engli
The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.
Light, elegant double-paddle canoe for glued-seam lapstrake construction.Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake, cold-molded or strip.No lofting required.Plans include 5 sheets.
Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing.
She is built of plywood and is intended for 15/20 hp outboard motors.
Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft.
Feel the difference a proportionally correct sized kayak can make in your paddling enjoyment.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.