If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The West River 18™ has built a huge following thanks to its speed, comfortable cockpit, and lithe good looks.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
The Sapphire 27 is developed from our very successful Design No. 056, to give a more traditional cruising oriented layout both down below and on deck.
Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.
Construction: Cold molded
Lofting is required
Plans include 5 sheets.
A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.
Construction Method: Carvel planked over steamed frames
Alternative construction: Cold-molded or strip
Lofting is required
Plans include 4 sheets.
DragonFlyer 3.2 is a great boat for all ages to build. We built the first boat, Zip, with our four kids, then aged seven to twelve and they all had a great time and learned along the way.
LITTLE CRAB is a smaller version of the Chesapeake Crab Skiff I drew several years ago.
Roberts 19 Trailerable gunkholing and coastal cruiser. Plans and full size frame patterns available for wood epoxy construction.
This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.
2018 Dark Harbor 17 1/2 constructed western red cedar planking on white oak frames., Teak deck.
100% original. Built by Saybrook Yacht Yard, CT. Always stored inside and covered.
LOA 22’-3”, Beam 6’-6”, Draft 2’ Disp. 1,500 lbs.
Launched by Ralph and Richard in 1992 for the original owner until 2024.
