Sailboats - Cruising
Cape Cutter 19
Cape Cutter 19 lapstrake plywood trailer-sailer
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Cape Cutter 19 lapstrake plywood trailer-sailer
We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise.
This design came about when I got to thinking about having an elegant dinghy for our 34′ Topsail Ketch Sunrise.
A quickly, easily and inexpensively built solo canoe, that can be built by one person with hand tools in three days. Complete plans and step-by-step instructions. A great family boatbuilding project.
We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with the kit.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are
A stable (28 1/2″ beam) strip-built touring kayak.
Planked up with 1/4″ cedar strips.
Construction: Strip planked.
Lofting is required.
Plans include 4 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.