Motorboats - Outboard
Compass Skiff
Easy To Build | Cartoppable | Build With The FamilySpecifications:
- LOA 9′ 6″
- LWL 8' Beam 49″
- Draft 3″
- Depth amidships 17 1/2″
- Power 6 hp outboard
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Easy To Build | Cartoppable | Build With The FamilySpecifications:
A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.
600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.
Safe, dry, fast, and seaworthy V-bottomed inboard powerboat designed for carvel planking.
Construction: Carvel planked over sawn frames.
Alternative construction: Strip
Lofting is required.
Propulsion: 6 cylinder 350 cubic inboard.
Plans include 6 sheets.
Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.
This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.
The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need
Sharpie 31.5′ EGRETL.O.A.: 31′ 6 ½″SPARRED LENGTH: 35′ 6″L.W.L.: 26′ 3″BEAM: 8′ 6″DRAFT: 1′ 2 ¼″ /4′ 8″SAIL AREA : (Depends on rig)DISP.: 5,000# (approximate, for cruising)BALLAST: 1,500 lbs. lead, inside; additional to trim as needed.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
A smart sturdy fast paced cruiser; huge interiors for a 8.80 LOA boat, good performance under sail, a very good handling and seaworthy boat even in rough conditions; round hull construction in plywood & epoxy , plans are higly detailed and cover all aspect of building, available both in engli
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.