Oar / Paddle
Skana
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).
The Tolman Skiff has a Dory heritage with a “V” bottom and was designed to handle the inland and open waters of Alaska and is a very capable ocean skiff.
“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p
Glued-lap plywood rowing or sailing tender with plenty of capacity. Construction: Glued lapstrake plywood. No lofting required. Plans include 5 sheets.
Light, elegant double-paddle canoe for glued-seam lapstrake construction.Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake, cold-molded or strip.No lofting required.Plans include 5 sheets.
Beamy yet fine-lined rowing/sailing boat designed for lightweight construction.
Construction: Cold-molded.
Lofting is optional.
Plans include 5 sheets.
In designing Capriccio we have been inspired by the aesthetics of the classic sport runabouts of the Thirties, which had the pilot seat in the extreme aft-wards of the boat and a powerful engine under a long deck in front of them.
The PUCK reflects the spirit of the original class which was to create a boat used in regattas but also suitable for coastal cruising, easy to carry and inexpensive.
This 16' x 21" [4.9m x 53cm] strip planked kayak is adapted to comfort and responsiveness in acti
This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water.