Oar / Paddle
16' 0" Canadien
A narrow beam and shallow arch hull make the Canadien ideal for general-purpose paddling and light tripping.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
A narrow beam and shallow arch hull make the Canadien ideal for general-purpose paddling and light tripping.
Derived from traditional Norwegian small craft, this handsome double-ender performs as well as a daysailer and beach cruiser.
Clean, frameless, glued-lapstrake plywood hull means, easy construction, happy trailering, and low maintenance.
Construction: Glued lapstrake plywood.
The drawing board of Sam Devlin has created another winner. The Pelicano Shrimper is an excellent choice for anyone who wants to maximize practicality in an 18' 4" package. The design has a small cabin forward, with enough space for a v-berth for the occasional overnight.
A smart sturdy fast paced cruiser; huge interiors for a 8.80 LOA boat, good performance under sail, a very good handling and seaworthy boat even in rough conditions; round hull construction in plywood & epoxy , plans are higly detailed and cover all aspect of building, available both in engli
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.
Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is included with the kit.
Caprice is a Mini Offshore Cruiser for two.
Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
Built in Denmark (1930s-40s ?) Eric Salander design. Restoration Project.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.