Oar / Paddle
Skana
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.
An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
Construction: Cross-planked bottom, lapstrake sides
Alternative construction: Plywood or glued-lapstrake plywood
Lofting is required
Kingfisher’ II is was developed directly from Kingfisher. Hull shape was modified with with flatten side line and reduced height. Other hull dimensions remain the same, width of 93 cm, flat bottom and slim shape gives good stability and maneuverability.
Spring Lake Small Craft can provide a very complete CNC routed kit for the Pippie 8 tender. Designed by Mike Waller (http://www.wallerdesign.com.au) to be used as a very versatile tender.
The Swifty 12 is the most popular boat in the Shell Boats fleet, with several hundred built from our kits and plans. Docile and easily handled, the Swifty will plane on a reach in a good breeze, but you will have to work very hard to get it to capsize.
A boat to take you to all the shallow water places that most sailors never see up close (deep water places too). At only 95 lbs it is easily car topped or trailered and can even be launched from many places without a ramp.
The Mini Vee is a simple-to-build v-bottom racing boat designed for APBA Mini GT and GT Pro racing. Also an excellent high-performance boat for the non-racer and a great boat building project for an individual or the whole family.
The Workstar 17, as Explorer, Fisherman and Rescue models.Designed using the Prefix System™ by Rob Humphries and Working Boats UK Ltd (the predecessor of Pacific Workboats cc), the Workstar 17 is built from a kit of profiled 1/2″ (12mm) and 3/4″ (18mm) marine plywood.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.