Oar / Paddle
15' 0" Bob's Special
An extremely light weight canoe of good carrying capacity, it is very steady and easy to portage through the brush.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
An extremely light weight canoe of good carrying capacity, it is very steady and easy to portage through the brush.
This small dinghy can be used for fishing, pleasure rowing or as a tender for a bigger yacht. It can also be fitted with a small outboard motor. The boat has a relatively high freeboard and can take a fair amount of load. It handles very well small waves or wake caused by powerboats.
SF Pelican 12 foot: Three sheets of drawings, step-by-step building instructions, sail plans, lists for materials and hardware, and sailing handling information.
Note: Drawing plans come in pdf format and can be printed to full hard copy format.
Roberts SPRAY 22 trailerable cruising sailboat you can build in wood epoxy using the plans and full size frame patterns.
The Unicat 2.4 is all about practicality and safety. Packing a 230kg load capacity, the Unicat is suitable for 3 adults, and the inverted vee hull is much more stable than conventional dinghies. The high freeboard also ensures a dry ride in most conditions.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The Shearwater Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
Outboard motor workboat for 8 to 30 hp Shallow draft, high capacity, simple build.
The Lobster Boat 26 (LB26) is a plan for amateur builders like no other!
“CHARM” is an 85′ LOA schooner originally designed to be a personal yacht that was built and fini
Built in 1933 as a commercial NC “sink netter”, “Sylvia II” has been totally restored and rebuilt
William Shaw design, 24' Yawl with shoal keel and centerboard, built 1958 in Denmark.