Oar / Paddle
Seagull
Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!
Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.
A deep-V bottomed, open runabout built of plywood over sawn frames.
Construction: Plywood planking over sawn frames
Lofting is required.
Plans include 5 sheets.
This is a simple 8ft stitch and glue sail/row pram. It requires only 3 sheets of marine plywood and should be very fast, easy, and inexpensive to build. It should end up just over 80lb so easy to transport as well.
Before the advent of the outboard motor, rowing/sailing skiffs were common on Chesapeake Bay. They were used for crabbing, fishing, transporting goods, and enjoying summer evenings with a friend.
NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.
A small river ferry has been designed to transfer up to 60 passengers.
The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.
The design is using the torqeedo electric motor concept using power dense lithium ion batteries.
Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.Construction: Strip-planked over laminated frames.Alternative construction: Cold-molded, plans included.Lofting is required.Plans include 6 sheets.
The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.The hull lines and the deck are to corner for simplicity of construction, and are harmonized with the hull volume.
Complete with spars and sails. Lying Cape Cod. Last restored c1970. Cockpit and deck are newer.
Lord Nelson Royal Navy 1798 pattern Pinnace. Pine on oak. Length 28.5 feet. Needs few repairs.