Motorboats - Outboard
Mark V 28
The Mark V 28 is a trailerable 28 foot outboard powered houseboat
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the featured boats must be built of wood. To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Mark V 28 is a trailerable 28 foot outboard powered houseboat
Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.
Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.
Construction: Cold molded
Lofting is required
Plans include 5 sheets.
V-bottomed seaworthy pocket daysailer/cruiser designed for plywood construction...
A shoal-draft, two-sail bateau from the Chesapeake - comfortable cruising for a couple and a daysailing party.
Construction: Traditional Chesapeake bateau construction.
Lofting is required.
Plans include 7 sheets.
“Breeze” is a 10′ (3m) double paddle canoe. Two sheets of plywood needed. Stitch and glue construction using 3″(75mm) fiberglass tape in epoxy for all seams inside and out. The deciding factors when designing the boat were mostly the same as with all my designs - seaworthiness and lightweight.
The Merlin Rocket is one of the UK’s premier 2 person racing dinghies.After nearly 70 years and 3750 boats built, the Merlin Rocket racing dinghy continues to develop and evolve.
This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.Construction: Batten-seam planking over sawn frames.Lofting is required.Plans include 4 sheets.
Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.
17' 9" glued lap strake sapele plywood with ribbon Sipo mahogany bright work.
Mahogany planked on oiled oak frames. Spruce spars and stainless rigging.
SUNDANCE II "Colonia" sailing dinghy designed in 1901 by Nathanael G. Herreshoff.
Restored in ME by Jonathan Minott (seen in WB "Launchings" July/Aug 2009).